Royal Crowne Cupolas
Royal Crowne cupolas are manufactured by Ridge Craft in Paradise, Pennsylvania. Offered are many different styles and sizes ranging from 18 to 72 inches square. Cupolas are made with your choice of Cellular-PVC, Western Red Cedar and capped with copper or galvanized metal roof. They will come pre-assembled in three sections for fast and convenient installation
MWI Components
MWI supplies Uni-Vent II and III to ventilate with a ridge cap, and they manufacture five Ridg-Vent profiles. Additionally, MWI offers over 100 colors for Ridg-Vents to match most roll-formers’ metal panels. The Ridg-Vents’ metal edges are hemmed for easier handling/improved strength. Their lack of raw metal edges prevents rust stains. MWI also manufacturers steel/aluminum soffit systems. Pre-cut or special-cut lengths are available–sizes 7” to 144”. When united, Ridg-Vents, Uni-Vent, and soffit provide superior ventilation.
Plyco Corporation
Plyco manufactures and distributes a variety of ventilation products designed to meet most airflow requirements. The MWE-100 is a low profile unit, 10 feet in length with 12 square inches of free air space per lineal foot. The MW100-25 has a higher profile than the MWE and is open at the top. The ventilator has an internal diverter to direct rain off to the side and out onto the roof. The MW100-35 has the same design as the 25 series with increased free air space of 36 square inches per lineal foot. The FMW100-35 is of the same design as the 35 series but the diverter is made from translucent fiberglass to allow light into the building ridge while keeping the rain out.
ST Fastening
ST Fastening Systems supplies its MultiVent and MultiVent10 closures for those applications requiring airflow on metal roofs. Open-cell foam MultiVent, 3 feet in length, and woven polyester MultiVent10, 10 feet in length, allows as much as 98 percent free airflow through the material. However, it prevents wind-driven rain from penetrating the material when compressed. The designs are universal for both, with adhesive applied for easy field installation. MultiVent can be used on angled roof applications and MultiVent10 for ridge cap applications.
CannonBall:HNP
CannonBall is offering FlexPro venting material, with protection that lasts like no other. Offering 40 years of warranted weather-tite performance, this recycled-material polyester prevents moisture absorption and holds together longer than standard polyurethane venting products. Available in 20-foot rolls to ride with CannonBall product shipments, FlexPro provides the durability and element resistance to meet building codes, reduce damage and save on costs.
Roll Former Corporation
Roll Former Corporation now offers two (2) perf units: the Stand Alone Perf Unit with two sets of perf dies for up to 24-inch wide flat stock, and the Ag Panel Perforator for ventilation needed on your ¾-inches by 5 rib wide ag panels. Complete with four sets of perf dies for this 38-inch wide popular panel. It can also perforate “flat stock” so you can post-process the rest of your ventilated trim products. 26 – 29 gauge ag panels or 24 gauge max flat stock. Call us today at 215-997-2511 or visit us online.
Marco Industries
As North America’s leading ventilation manufacturer Marco Industries offers superior roof ventilation your way, with products tailored to fit your specific performance requirements and budget. Our ventilation products feature an exclusive nonwoven polyester material that delivers extreme durability and breathes, to help prevent moisture absorption. All ventilation products offer a 40-year limited warranty, easy one-person installations, and two full beads of M63, Marco’s proprietary adhesive, for superior hold.